Configure the Stillpoints ESS Rack to optimize space needed, and the performance of each component. Each rack requires, two masts, two cross bars, and shelves configured with support bars, using your choice of acrylic, X Grids, or Rail Grids to complete each platform.
Showing all 15 results
-
Acrylic Shelf – Long for 26″ Wide Racks
Each pack contains 1 x acrylic shelf and 1 x set screw kit. 40" wide racks will require 2 packs.
Read more -
Acrylic Shelf – Short for 20″ and 40″ Wide Racks
Each pack contains 1 x acrylic shelf and 1 x set screw kit. 40" wide racks will require 2 packs.
Read more -
Blank Support Bar Assembly – 40″ Wide Racks
Each pack contains 2 support bars.
Read more -
X Grid – Long for 26″ Wide Racks
Each pack contains 4 x struts and 1 x set screw kit for 26" wide racks.
Read more -
X Grid – Short for 20″ and 40″ Wide Racks
Each pack contains 4 x struts and 1 x set screw kit for 20" and 40" wide racks. 40" wide racks will require 2 packs.
Read more -
Blank Support Bar Assembly – 26″ Wide Racks
Each pack contains 2 support bars.
Read more -
Blank Support Bar Assembly – 20″ Wide Racks
Each pack contains 2 support bars.
Read more -
Support Bar Assembly with Technology Pockets – 40″ Wide Racks
Each pack contains 2 support bars.
Read more -
Support Bar Assembly with Technology Pockets – 26″ Wide Racks
Each pack contains 2 support bars.
Read more -
Support Bar Assembly with Technology Pockets – 20″ Wide Racks
Each pack contains 2 support bars.
Read more -
Rail Grids – 1 pack
This pack contains 1 x Rail Grid made up of; 2 x T-Nuts, 2 x 5/8" set screws, 1 x Rail Bars, and 2 x Rail Bar Locks.
Read more -
Rail Grids – 2 pack
This pack contains 2 x Rail Grids made up of; 4 x T-Nuts, 4 x 5/8" set screws, 2 x Rail Bars, and 4 x Rail Bar Locks.
Read more -
ESS Racks
Configure the Stillpoints ESS Rack to optimize space needed, and the performance of each component. Each rack requires, two masts, two cross bars, and shelves configured with support bars, using your choice of acrylic, X Grids, or Rail Grids to complete each platform.
Read more -
Cross Bars
Each pack contains 2 cross bars.
Read more -
Masts
Masts are tube assemblies that connect the cabling to the arms and legs. The height measurement is taken from the floor, to the top of the arm, and rounded to the nearest inch. Each mast assembly contains the two tubes required for a single ESS Rack.
Read more